Is your computer not performing as well as you’d like? If so, it may be because your RAM is running at a slower speed than it could be.
To elaborate, RAM speed is an important factor in overall pc performance. You may want to change your ram speed if you’re not getting the performance you want from your pc.
And If you’re like me, you probably want to squeeze every bit of performance out of your hardware. And if you’re using an ASUS, there’s an easy way to do just that with the BIOS.
So keep on reading this article as I will guide on you how to change the RAM speed in BIOS ASUS. So whether you have a slow DDR3-1333 kit or a blazing fast DDR4-3200 set, you will be up and running in no time.
Things You Need To Consider First
- The speed at which your RAM is currently running
- The maximum speed your RAM is rated for
- The type of RAM you have (DDR3 or DDR4)
What Exactly Is RAM Speed?
RAM speed is the rate at which your RAM can send and receive data. The speed is measured in MHz and usually ranges from 800MHz to 4200MHz. So, a higher number means that your RAM can send and receive data faster.
How Does RAM Speed Affect Performance?
The main way that RAM speed affects performance is by reducing latency. To put it simply, latency is the time it takes for your computer to access data stored in RAM.
The thing is, modern CPUs are incredibly fast. They can easily outpace even the fastest storage drives. But they still need to access data stored in RAM eventually.
And if your RAM has high latency, it can bottleneck your CPU and slow down your computer as a whole.
Of course, RAM speed is just one factor that affects overall performance. But it’s still an important one.
What are DDR3 & DDR4 RAM?
DDR3 and DDR4 are the two most common types of RAM. They’re not compatible with each other, so you need to make sure you have the right type for your motherboard.
DDR3 is the older standard and it’s slowly being phased out in favor of DDR4. That said, it’s still widely used and it’s not going anywhere anytime soon.
DDR4 is the newer standard and it offers a few advantages over DDR3. It has a higher maximum speed, and lower latency, and uses less power.
For that reason, DDR4 is generally the better choice if you’re looking to upgrade your RAM. But if you’re on a budget, DDR3 will still get the job done.
How To Check Your Current RAM Speed
Before you go and change your RAM speed, you need to know what speed it’s currently running at. The easiest way to do this is to use a free program like CPU-Z.
Once you have CPU-Z installed, launch the program and go to the “Memory” tab. There, you’ll see all sorts of information about your RAM, including the current speed.
How to Change Your RAM Speed in the BIOS ASUS
Now that you know everything there is to know about RAM speed, it’s time to learn how to change it in the BIOS.
The BIOS is a low-level settings menu that lets you tweak all sorts of things on your computer, including the CPU, storage drives, and of course, RAM.
Every motherboard is different, so the exact steps may vary slightly. But in general, here’s what you need to do:
- Restart your computer and press the key needed to enter the BIOS. This is usually F2, F10, or Del.
- Once you’re in the BIOS menu, use the arrow keys to navigate to the “Advanced” tab.
- Navigate to the “Memory Configuration” or “RAM Speed” setting and use the arrow keys to change the speed.
- Once you’ve selected the desired speed, press F10 to save and exit the BIOS.
- Your computer will now boot up with the new RAM speed. Keep in mind that you may need to increase the voltage to your RAM if you’re running it at a higher speed than its rated for.
- And that’s all there is to it! Just remember to be careful when changing settings in the BIOS. It’s easy to accidentally change something that you didn’t mean to, which can cause problems down the road.
If you’re not sure what something does, it’s always best to leave it at the default setting.
Additionally, if these settings don’t help or are deemed to confusing for you, you can Toggle XMP profile
What is XMP Profile?
XMP, which stands for Extreme Memory Profile, is a feature that’s built into most modern RAM modules. It allows you to easily overclock your RAM without having to fiddle with the BIOS settings.
To use XMP, just enable the profile in the BIOS and select the desired speed. The motherboard will automatically adjust the timings and voltage as needed.
Keep in mind that not all motherboards support XMP. So, if yours doesn’t have the option, you’ll need to manually change the settings in the BIOS.
And that’s everything you need to know about how to change your RAM speed in the BIOS ASUS, Just remember to be careful when tinkering with the settings, and make sure you have the right type of RAM for your motherboard.
Do you have any questions about changing your RAM speed? Let us know in the comments below!